Toshiba Tekbright 700P - Manual (Page 156)

159 VPN Configuration and Usage
Connecting to the VPN
5.375 x 8.375 ver 2.1
❖ Remote IP Address: IP address of the public port for the
remote Magnia SG20. This can be viewed on the LCD
screen or report pages of the web administration, and is
labeled “Public IP”.
❖ Remote Private Address: IP address of the remote
Magnia SG20 private network. By default, this is
192.168.1.1, but can be changed in the advanced
networking screen of the web administration user
interface.
❖ Remote Next Hop: This is the IP address of the remote
ISPs gateway server. This can be obtained from the ISP
that provides the Internet connection for the remote
server.
❖ Remote Private Subnet Mask: The subnet mask for the
remote Magnia SG20’s private network. By default, this
is 255.255.255.0, but can be changed on the Advanced
Networking screen.
❖ Remote Firewall: Defines whether the remote Magnia
SG20 has its firewall up. This should normally be left set
to “Yes”.
❖ Shared key: The shared key is a password you choose
and enter in both Magnia SG20s. The same key must be
entered on each of the Magnia SG20’s IPSec
configuration in order to authenticate and authorize the
connection.
6 When you have finished entering the information, click
Apply to save your settings.