Toshiba Tekbright 700P - Manual (Page 216)

222 Advanced Networking Features
5.375 x 8.375 ver 2.1
Resetting Default Networking Configuration
If you ever need to reset your advanced networking settings
back to their default factory released condition, you can do
so. Go to the Administrative Web site and click on the
Network tab, then select the Local menu item. On this
screen, select the Advanced button.
The advanced networking screen has a button labeled Reset
to Factory Defaults. By clicking on this button, you will reset
the advanced networking configurations to their original
defaults. These include:
❖ NAT on
❖ DHCP on
❖ Local IP address range 192.168.1.2 through
192.168.1.238
❖ Server private address 192.168.1.1
SNMP Support
The Magnia SG20 contains an SNMP management agent that
is capable of sending standard SNMP v.2 alerts, and
responding to SNMP agent queries with information about
the current state of the server. The Simple Network
Management Protocol (SNMP) allows remote network
management consoles (NMC) to query and set configuration
values on a hardware device. This enables network
management staff to control and monitor many network
devices from a single location. This feature is intended for
use in large scale, managed network environments.
SNMP Agent Services
The version of SNMP supported is SNMP v.2c. The Magnia
SG20 server appliance has an SNMP Agent that will respond
to configuration information queries. The SNMP Agent on
the server appliance only supports “Get” requests from the
NMC. “Set” requests are not supported. In other words, you