Toshiba Tekbright 700P - Manual (Page 273)

281 Manually Configuring Clients for the Magnia SG20
Manually configuring clients with Windows NT 4.0, Windows
2000 and Windows XP operating systems
5.375 x 8.375 ver 2.1
3 When the Command Prompt window opens, type ping
192.168.1.1 and press Enter .
If the words “Request timed out” or “Bad command or
file name” appear in the window, you must configure
your network settings.
4 While the Command Prompt is open, type ipconfig \all and
press Enter .
If the words “DHCP Server…..:192.168.1.1” do not
appear, or the words “Bad command or file name”
appear, you must configure your network settings.
5 Click Start, Settings, Control Panel, and double-click
the Network icon.
The Network Properties dialog box appears.
6 Click the Protocol tab.
Installing TCP/IP
If there is no listing for TCP/IP in the Network Protocols box,
continue with these steps to install TCP/IP.
1 Click Add.
2 When the Select Network Component Type dialog box
appears, select TCP/IP Protocol in the Network Protocol
box, then click Add.
3 Follow the prompts and accept all defaults.
4 Restart the client computer to complete installation of
TCP/IP.
Determining if configuration is required
1 Click Start, Settings, Control Panel and double-click
the Network icon.
The Network Properties dialog box appears.
2 Click the Identification tab.