Toshiba Tekbright 700P - Manual (Page 262)

270 Manually Configuring Clients for the Magnia SG20
Manually configuring clients using the Windows 95, 98 and
Windows Me operating system
5.375 x 8.375 ver 2.1
3 In the list labeled The following network components are
installed: click the TCP/IP item that is associated with
the network adapter card you wish to use for connecting
to the Magnia SG20, then click Properties.
4 When the TCP/IP Properties dialog box appears, click the
IP Address tab.
NOTE: If Specify IP Address is selected and you have numbers in
the “IP Address” box or the “Subnet Mask” box, write them down
now.
5 Select the Obtain an IP Address Automatically option.
6 Click OK on the TCP/IP Properties dialog box to close it.
7 Click the Identification tab.
8 Verify that the computer name displayed is unique for
your network. If it is not a unique name, change it to one
that will not be used by any other computer.
9 In the Workgroup box, type in SAWORKGROUP (all upper
case letters) to completely replace any text that was there
before.
10 Click OK on the Network Properties dialog box to close
it.
11 Restart the computer.
Configuring Internet Explorer to connect to the Magnia SG20
Although you may use any Internet browser to access your
Magnia SG20, this section explains how to configure
Microsoft
®
Internet Explorer.