Leica Biosystems CV5030 - Manual (Page 55)

55 Leica CV5030 – Robotic Coverslipper
5.7 Display indicators and instructions (continued)
5. Operation
Display Explanation Action
Indicates that a specimen slide
holder that has been transferred
from the staining machine is in
the process of coverslipping.
Wait for the specimen slide to
finish processing.
There are two empty specimen
slide holders on the discharge
chute of the transfer station.
Remove the empty specimen
slide holders from the discharge
chute of the transfer station.
The capacity of the discharge
chute has been reached. There
are three empty specimen slide
holders on the discharge chute
of the transfer station.
The empty specimen slide hold-
ers absolutely must be removed
from the discharge chute of the
transfer station, otherwise no
other specimen slide holders
can be transported from the
staining machine to the CV5030.
The following status messages are displayed only if the instrument is connected to a staining
machine (Leica ST5010 or Leica ST5020) via a transfer station.