Leica Biosystems CV5030 - Manual (Page 62)

62 Instructions for Use V 3.0 RevE – 04/2013
5.11.1 Leaving the parameter and submenu
5. Operation
The Pick & Place module moves to the cover slip magazine and
lowers itself down to the top cover slip. Then it returns to its origi-
nal position.
The setting for the new cover slip limit has now been saved and
the overview for the parameter setting in Menu B reappears on
the display.
Coverslip Limit Adjust - setting for the cover slip limit (continued)
т
т
After pressing EXIT, the instrument is back in a ready-to-start state.
ò
The configured value of the cover slip limit is transferred
and saved in all parameter sets (Set 1 through 4) automati-
cally.
Procedure:
a) Including saving the previously programmed parameter:
• Press RESPOND once, then press EXIT.
b) Without saving the previously modified parameter:
• Press EXIT once.
5.11 Menu B – parameter settings (continued)