Leica Biosystems CV5030 - Manual (Page 61)

61 Leica CV5030 – Robotic Coverslipper
Coverslip Limit Adjust - setting for the cover slip limit
The setting of the LIM (cover slip limit setting)
parameter defines what quantity of cover slips
remaining in the coverslip magazine is used to
display the "COVERSLIPS LOW" notice on the
display. This notifies the user of a critical (low)
number of cover slips remaining in the magazine.
The setting is made as follows:
Place a cover slip stack (approx. 30 - 40 pieces)
in the empty coverslip magazine.
Then, press the START button.
5. Operation
ð
Speaker Volume Level - volume of the audible signal
Setting for the volume of key tones, messages and
the signal tone:
In increments of 1 from 1 (quiet) to 3 (loud)
ð
5.11 Menu B – parameter settings (continued)
The signal tone and audible signals of the
buttons cannot be disabled completely.