Leica Biosystems CV5030 - Manual (Page 9)

9 Leica CV5030 – Robotic Coverslipper
1.2 User group
• The Leica CV5030 may be operated by trained
laboratory personnel only.
• All laboratory personnel designated to operate
this instrument must read these Instructions
for Use carefully and must be familiar with all
technical features of the instrument before
attempting to operate it.
Fig. 1
1.3 Intended use of instrument
The Leica CV5030 is a robotic coverslipper for
coverslipping tissue sections, cells or swabs
mounted on specimen slides with cover slips
made out of glass using a wide variety of differ-
ent cover slip mountants. It may only be used
with instrument accessories approved by Leica
Biosystems Nussloch GmbH.
1.4 Instrument type
All information provided in these Instructions for
Use applies only to the instrument type indicated
on the cover page.
A nameplate indicating the instrument serial
number is attached to the rear side of the in-
strument. (The serial number is also displayed
above the loading door on the front side of the
instrument.)
1. Important Information
Any use of the instrument other than
its designated use is considered im-
proper.
Failure to adhere to these instructions
may result in an accident, personal
injury, damage to the instrument or ac-
cessory equipment.
Proper and intended use includes
compliance with all inspection and
maintenance instructions, along with
the observance of all instructions in
the Instructions for Use.
Fig. 1 is provided as an example only
and shows a valid nameplate for this
instrument with the necessary in-
formation about instrument type and
power requirement. The precise data
for the various versions is specified in
Chapter 3.2 "Technical data" .