Lenze EVS93xx FlyingSaw - Manual (Page 114)

FlyingSaw
Description of the function blocks
 Prepared Solution Servo PLC / ECSxA 1.1 EN 10-16
Task information
Can be called in: Cyclic task Time-controlled task
(INTERVAL)
Event-controlled task
(EVENT)
Interrupt task
Variable names
Inputs (Variable type: VAR_INPUT)
Identifier Data type Meaning
wProRelease WORD main version for the project:: the value entered must be in the range between 0 and 99.
wProLevel WORD subversion for the project:: the value entered must be in the range between 0 and 99.
wProServicePack WORD version of service-pack: the value entered must be in the range between 0 and 99.
wLib1Release WORD main version for library 1 (e.g. application library): the value entered must be in the range between 0
and 99.
wLib1Level WORD subversion for library 1 (e.g. application library): the value entered must be in the range between 0 and
99.
wLib1ServicePack WORD version of service-pack: the value entered must be in the range between 0 and 99.
wLib2Release WORD main version for library 2 (e.g. basic library): the value entered must be in the range between 0 and 99.
wLib2Level WORD subversion for library 2 (e.g. basic library): the value entered must be in the range between 0 and 99.
wLib2ServicePack WORD version of service-pack: the value entered must be in the range between 0 and 99.
Internal (Variable type: VAR)
Identifier Data type Meaning
awVersion ARRAY [1..3] OF
DWORD
Data field with indication of the three versions: the first and the second number is the main versio, the
third and the fourth is the subversion and the fith and the sixth is the number of the service-pack.
Example: main verison 1.0, subversion 0.0, service-pack 1.0, display: 10001
The values are calculated using the following formulas:
adwVersion[1] :=((dwProRelease * 100 + dwProLevel)*100)+dwProServicePack;
adwVersion[2] :=((dwLib1Release * 100 + dwLib1Level)*100)+dwLib1ServicePack;
adwVersion[3] :=((dwLib2Release * 100 + dwLib2Level)*100)+dwLib2ServicePack;