Lenze EVS93xx FlyingSaw - Manual (Page 62)

FlyingSaw
Commissioning the "(Flying Saw)"
 Prepared Solution Servo PLC / ECSxA 1.1 EN page 4-49
Start the GDLoader and run a search for all drives connected via the system bus. GDLoader now scans the
system bus and finds the servo drive:
Now allocate the files to the required servo axis by clicking the corresponding icons in the column on the left:
Step 6
Step 5
Click the required servo controller (in the example the
controller with system bus node address 1) and accept
using Ok.
For the DDS binary file select the following file:
Project:
FlyingSaw_SPLC_Vxxxxxx.bin (ServoPLC)
FlyingSaw_ECS_Vxxxxxx.bin (ECSxA)