Lenze EVS93xx FlyingSaw - Manual (Page 6)

FlyingSaw
Preface and general information
 Prepared Solution Servo PLC / ECSxA 1.1 EN page 1-2
1.2 Scope of supply
The CD-ROM enclosed contains the following files:
File type Use
*.BIN
FlyingSaw_SPLC_Vxxxxxx.bin
FlyingSaw_ECS_Vxxxxxx.bin
Binary file:
The binary file contains the compiled project with all system
and application codes (for information on application codes
see chapter 11.3.1) and can be transferred to the target
system using the Lenze software tool GDLoader. The
binary file is required if the parameterisable variant (see
chapter 1.4.1) is to be used.
*.LPC
FlyingSaw_SPLC_Vxxxxxx.lpc
FlyingSaw_ECS_Vxxxxxx.lpc
Template model:
The template model contains the source code for the
Prepared Solution and is required if the programmable
variant is to be used (see chapter 1.4.2). It can be edited,
translated and transferred to the target system using the
Lenze software DDS.
*.LIB
FlyingSaw_SPLC_Vxxxxxx.lib
FlyingSaw_ECS_Vxxxxxx.lib
Library file:
The library file contains the core functionality for the
Prepared Solution and is the basis for the project file.
Without the library file the project file cannot be completely
translated in DDS.
*.PDB
FlyingSaw_SPLC_Vxxxxxx.pdb
FlyingSaw_ECS_Vxxxxxx.pdb
Device description file:
The device description file is required for setting the
parameters for the Prepared Solution (parameterisable
version) using the Lenze software tool GDC. Before GDC is
used, the device description file must be copied to the
corresponding directory for the GDC software).
*.SDB
FlyingSaw_SPLC_Vxxxxxx.sdb
FlyingSaw_ECS_Vxxxxxx.pdb
Symbol file for GDOscilloscope:
The symbol file for use in connection with the Lenze
software Global Drive Oscilloscope contains a list of signals
in the Prepared Solution that can be displayed using the
oscilloscope. When the GDOscilloscope is started this file
must be assigned to be able to access the required signals
from the Prepared Solution.
*.PDF
FlyingSaw_vx-x_DE.pdf
FlyingSaw_vx-x_EN.pdf
PDF file (manual):
This manual describes the Prepared Solution in detail.
The files are installed automatically by the setup provided on the product CD.