Lenze EVS93xx FlyingSaw - Manual (Page 53)

FlyingSaw
Functions
 Prepared Solution Servo PLC / ECSxA 1.1 EN page 3-40
The output of the individual status words to system variables (shown in the illustration as Word
0
, Word 1, Word 2 and Word 4) is dependent on the operating mode C4000/000:
Signal source Word 0 Word 1 Word 2 Word 3
C4000/000 = 0 - 4 - C4150/000
C4000/000 = 1 CAN1_wDctrlStat CAN1_nOutW1_a CAN1_nOutW2_a CAN1_nOutW3_a
C4000/000 = 2 CAN2_nOutW1_a CAN2_nOutW2_a CAN2_nOutW3_a CAN2_nOutW4_a
C4000/000 = 3 CAN3_nOutW1_a CAN3_nOutW2_a CAN3_nOutW3_a CAN3_nOutW4_a
C4000/000 = 4 AIF1_wDctrlStat AIF1_nOutW1_a AIF1_nOutW2_a AIF1_nOutW3_a
C4000/000 = 5 AIF2_nOutW1_a AIF2_nOutW2_a AIF2_nOutW3_a AIF2_nOutW4_a
C4000/000 = 6 AIF3_nOutW1_a AIF3_nOutW2_a AIF3_nOutW3_a AIF3_nOutW4_a
.