Rockwell Automation 825 Smart Motor Manager User Manual User Manual
Smart motor manager
Advertising
Table of contents
Document Outline
- Front Cover
- Important User Information
- European Communities (EC) Directive Compliance
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Equipment Description
- Chapter 3: Functions
- Menu Overview
- Operation
- Function Summary
- Functions of the Basic Unit (Cat. No. 825-M…)
- Thermal Overload
- Adjustable Ratio of Cooling Constants
- Indication of the Time to Tripping
- Indication of the Time until the Thermal Trip can be Reset
- Adjustable Setting Characteristic
- Asymmetry (Phase Unbalance) and Phase Failure
- High Overload and Jam
- Underload
- Earth (Ground) Fault
- Limiting the Number of Starts per Hour (Start Lockout)
- Monitoring the Starting Time
- Warm Start
- Emergency Override of Thermal Trip (Emergency Start)
- LED Alarm and Trip Indicator
- Connection of the Main Relay (MR)
- Connection of the Alarm Relay (AL)
- Alarm Relay AL
- Reset
- Function of the Cat. No. 825-MST Option Card
- Short-Circuit
- Earth (Ground) Fault Protection with a Core Balance Current Transformer
- Stalling During Start
- PTC Thermistor Input
- Analog Output
- Analog Output for Thermal Load or Motor Temperature (PT100 Max.)
- Analog Output for Motor Current
- Control Inputs #1 and #2
- Switching to a Second Rated Current
- Functions of the Cat. No. 825-MLV Option Card
- Functions of the Cat. No. 825-MMV Option Card
- Chapter 4: Assembly and Installation
- Chapter 5: Setting the Operational Parameters
- Chapter 6: Commissioning and Operation
- Chapter 7: Testing and Maintenance
- Chapter 8: Error Diagnosis and Troubleshooting
- Chapter 9: Applications/Wiring
- Bulletin 825 Smart Motor Manager with Contactors
- Star-Delta Starter with Bulletin 825 Smart Motor Manager
- Short-Circuit Protection of Medium/High-Voltage Motors
- Two-Speed Motors
- Two-Speed Motor: 0.5 A < Speed I < 20 A < Speed II < 180 A
- Two-Speed Motors with Primary Current Transformer
- Separately Ventilated Motors
- Basic Unit and Converter Module with Primary Current Transformer and Core Balance Current Transfo...
- Basic Unit and Converter Module with Core Balance Current Transformer
- Motors with Low Idling Current (<20% Ie)
- Basic Unit and Converter Module with Primary Current Transformer, 2Phase Current Evaluation
- Time/Current Characteristic of Bulletin825 Smart Motor Manager
- Chapter 10: References
- Back Cover/Pub. No.