Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 129)

Testing and Maintenance 7-3
Publication 825-UM001B-EN-P January 2001
Table 7.A List of Recorded Values (Continued)
LCD Description
Time since one trip prior to last trip in hours, minutes
Time since two trips prior to last trip in hours, minutes
Time since three trips prior to last trip in hours, minutes
Time since four trips prior to last trip in hours, minutes
Cause of last trip, e.g., asymmetry
Cause of one trip prior to last trip, e.g., asymmetry
Cause of two trips prior to last trip, e.g., overcurrent
Cause of three trips prior to last trip, e.g., thermal
Cause of four trips prior to last trip, e.g., thermistor
Time elapsed since last emergency start in hours, minutes
Time elapsed since last power failure in hours, minutes
Duration of power failure in hours, minutes
Motor current before last trip as a percentage of rated service current ( ,
e
)
Short circuit = 999%
Asymmetry before last trip in percent
Earth (ground) fault current before last trip as percentage of rated current
or…mA
SINCE 1 PRV TRIP
--- H -- MIN
SINCE 2 PRV TRIP
--- H -- MIN
SINCE 3 PRV TRIP
--- H -- MIN
SINCE 4 PRV TRIP
--- H -- MIN
CAUSE LAST TRIP
ASYMMETRY TRIP
CAUSE 1 PRV TRIP
ASYMMETRY TRIP
CAUSE 2 PRV TRIP
OVERCURRENT TRIP
CAUSE 3 PRV TRIP
THERMAL TRIP
CAUSE 4 PRV TRIP
PTC TRIP
SINCE EMG START
--- H -- MIN
SINCE POWER OFF
--- H -- MIN
DURATION POW OFF
--- H -- MIN
I BEF LAST TRIP
--- % IE
AS BEF LAST TRIP
--- %
EF BEF LAST TRIP
--- % I