Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 15)

Publication 825-UM001B-EN-P January 2001
Chapter
1

Introduction
Why Have an Electronic Control and Protection System?
The need to optimize production facilities requires enhanced control, monitoring, and
protection systems.
Motor and installation use must be maximized while minimizing both the downtime required
for maintenance and that caused by motor failures; these requirements are easily met by the
microprocessor-based Bulletin 825 Smart Motor Manager.
The Bulletin 825 Smart Motor Manager has a modular design and is easily programmed. Its
attributes enable an optimum fit to a wide variety of motor and installation requirements.
The Bulletin 825 Smart Motor Manager provides continuous monitoring of motor operating
data in one of two ways. The data can be viewed directly on the unit or it can be monitored
remotely via a network by using a PC or process computer. The main statistical data can also
be accessed at any time.
Figure 1.1 Bulletin 825 Smart Motor Manager