Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 40)

3-7 Functions
Publication 825-UM001B-EN-P January 2001
Indications of Actual Values
In “Actual Values” mode, all operating parameters can be selected and read from the LCD.
1. Press Values until “ACTUAL VALUES” appears on the display.
2. Press Select (Up or Down) until the desired information is displayed.
Figure 3.4 Selecting the Actual Values
Table 3.E Display Example of Actual Values Menu
Note: For a complete list of parameters, refer to Chapter 6 .
LCD Range Description
—
Display of the actual
values
0.00…49.99
50…24 000
Motor current in A
0…100 Thermal utilization
0/20…999 Motor current as percent of rated current
Values
Recorded
Actual
Set
Select Settings
Enter
Change
Values
Recorded
Actual
Set
Select Settings
Enter
Change
I MOTOR 00 % I e
ACTUAL VALUES
ACTUAL VALUES
I MOTOR…A
TH UTILIZ…%
I MOTOR…% Ie