Rockwell Automation 825 Smart Motor Manager User Manual - Manual (Page 127)

Publication 825-UM001B-EN-P January 2001
Chapter
7

Testing and Maintenance
General
The correct functioning of the Smart Motor Manager can be checked by several methods,
depending on the requirements:
• With the Test button
• With the test condition set
• With a single- or 3-phase current source
A test may be beneficial:
• During commissioning
• Following an interruption in operation
• Following overhauls
• Following reconstruction of the installation
After a test is conducted, the display provides information on the running time of the Smart
Motor Manager and the motor, the number of operations performed by the motor, the
contactor, etc. From this information, necessary maintenance and installation replacements
can be derived.
Checking without Test Equipment
Functional Check with the Test Button
With the motor at standstill, the thermal protection, all alarms, trips, and tripping times can be
checked with the aid of the Test button. Page
3-9 for the specific procedures.