Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules - Manual (Page 18)

18 Publication 1756-UM009C-EN-P - December 2010
Chapter 1 What Are ControlLogix Analog I/O Modules?
Parts Illustration of the ControlLogix Analog I/O Module
Removable Terminal Block
1
2
3
4
5
6
40200-M
Item Description
1 Backplane connector - Interface for the
ControlLogix system that connects the
module to the backplane.
2 Top and bottom guides - Guides provide
assistance in seating the RTB or IFM cable
onto the module.
3 Status indicators - Indicators display the
status of communication, module health,
and input/output devices. Indicators help in
troubleshooting anomalies.
4 Connectors pins - Input/output, power,
and grounding connections are made to the
module through these pins with the use of
an RTB or IFM.
5 Locking tab - The locking tab anchors the
RTB or IFM cable on the module,
maintaining wiring connections.
6 Slots for keying - Mechanically keys the
RTB to prevent inadvertently making the
wrong wire connections to your module.