Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules User Manual
Page 265
Advertising
Publication 1756-UM009C-EN-P - December 2010
265
Calibrate the ControlLogix Analog I/O Modules Chapter 11
After you have completed both low and high reference calibration, this
window shows the status of both.
16.
Click Finish.
The Calibration tab on the Module Properties dialog box shows the
changes in the Calibration Gain and Calibration Offset. The date of the
latest calibration also displays.
17.
Click OK.
Advertising