Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules - Manual (Page 232)

232 Publication 1756-UM009C-EN-P - December 2010
Chapter 10 Configure ControlLogix Analog I/O Modules
View Module Tags When you create a module, a set of tags is created by the ControlLogix system
that can be viewed in the Tag Editor of the RSLogix 5000 software. Each
configured feature on your module has a distinct tag that can be used in the
processor’s ladder logic.
Follow these steps to access a module’s tags.
1. At the top of the Controller Organizer, right-click Controller tags and
choose Monitor Tags.
The Controller Tags dialog box appears with data.
2. Click the slot number of the module for which you want to
view information.
See Appendix B for details on configuration tags.