1756-if16 fault reporting in integer mode – Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules User Manual

Page 82

Advertising
background image

82

Publication 1756-UM0009C-EN-P - December 2010

Chapter 4 Non-isolated Analog Voltage/Current Input Modules (1756-IF16, 1756-IF8)

1756-IF16 Fault Reporting
in Integer Mode

The illustration is an example of the fault reporting process for the 1756-IF16
module in integer mode.

Module Fault Word

(described on

page 83

)

15

14

13

12

11

10

9

5

4

3

2

1

0

0

15 = AnalogGroupFault
10 = Calibrating
9 = Cal Fault
14, 13, 12, & 11 are not used

31 = Ch0Underrange
30 = Ch0Overrange
29 = Ch1Underrange
28 = Ch1Overrange
27 = Ch2Underrange
26 = Ch2Overrange
25 = Ch3Underrange
24 = Ch3Overrange

41513

Underrange and overrange conditions
set the corresponding Channel Fault
word bit for that channel

When the module is
calibrating, all bits in the
Channel Fault word are set

If set, any bit in the Channel Fault word, also sets the Analog
Group Fault and Input Group Fault in the Module Fault word

A calibrating fault
sets bit 9 in the
Module Fault word

31

9

8

7

6

15

14

13

12

11

10

7 = Ch7Fault
6 = Ch6Fault
5 = Ch5Fault
4 = Ch4Fault
3 = Ch3Fault
2 = Ch2Fault
1 = Ch1Fault
0 = Ch0Fault

15 = Ch15Fault
14 = Ch14Fault
13 = Ch13Fault
12 = Ch12Fault
11 = Ch11Fault
10 = Ch10Fault
9 = Ch9Fault
8 = Ch8Fault
16 channels used in S.E. wiring
8 channels used in Diff. wiring
4 channels used in H.S. Diff. wiring
All start at bit 0

23 = Ch4Underrange
22 = Ch4Overrange
21 = Ch5Underrange
20 = Ch5Overrange
19 = Ch6Underrange
18 = Ch6Overrange
17 = Ch7Underrange
16 = Ch7Overrange

15 = Ch8Underrange
14 = Ch8Overrange
13 = Ch9Underrange
12 = Ch9Overrange
11 = Ch10Underrange
10 = Ch10verrange
9 = C11Underrange
8 = Ch11Overrange

7 = Ch12Underrange
6 = Ch12Overrange
5 = Ch13Underrange
4 = Ch13Overrange
3 = Ch14Underrange
2 = Ch14Overrange
1 = Ch15Underrange
0 = Ch15Overrange

16 channels used in S.E. wiring
Eight channels used in Diff. wiring
Four channels used in H.S. Diff. wiring
All start at bit 31

Channel Fault Word

(described on

page 83

)

Channel Status Words

(described on

page 84

)

Advertising