Remove the module from the chassis – Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules User Manual
Page 197
Advertising
Publication 1756-UM009C-EN-P - December 2010
197
Install ControlLogix I/O Modules Chapter 9
3.
Hold the spot marked PULL HERE and pull the RTB off the module.
Remove the Module
from the Chassis
Follow these steps to remove a module from its chassis.
1.
Push in the top and bottom locking tabs.
2.
Pull the module out of the chassis.
IMPORTANT
Do not wrap your fingers around the entire door. A shock hazard
exists.
20855-M
20856-M
20857-M
Advertising