Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules - Manual (Page 279)

Publication 1756-UM009C-EN-P - December 2010 279
Analog I/O Module Specifications Appendix A
1756-IF6CIS
ControlLogix sourcing current loop analog input module
+
–
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
VOUT-1
IN-1/I
RTN-1
VOUT-3
IN-3/I
RTN-3
Not Used
VOUT-5
IN-5/I
RTN-5
VOUT-0
IN-0/I
RTN-0
VOUT-2
IN-2/I
RTN-2
Not Used
VOUT-4
IN-4/I
RTN-4
2-wire
Transmitter
Shield Ground
i
1756-IF6CIS 2-wire Transmitter Connected to the Module and the
Module Providing 24V DC Loop Power
+ –
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
VOUT-1
IN-1/I
RTN-1
VOUT-3
IN-3/I
RTN-3
Not Used
VOUT-5
IN-5/I
RTN-5
VOUT-0
IN-0/I
RTN-0
VOUT-2
IN-2/I
RTN-2
Not Used
VOUT-4
IN-4/I
RTN-4
2-wire
Transmitter
24V DC
Shield Ground
1756-IF6CIS 2-wire Transmitter Connected to the Module and an
External, User-provided Power Supply Providing 24V DC Loop Power
· Do not connect more than two wires to any single terminal.
· Place additional loop devices (such as strip chart recorders)
at either A location in the current loop.
· If separate power sources are used, do not exceed the
specified isolation voltage.
· Do not connect more than two wires to any single terminal.
· Place additional loop devices (such as strip chart recorders) at
either A location in the current loop.