Rockwell Automation RSBizWare Administration Guide - Manual (Page 156)

Chapter 4 Migrating RSBizWare
10. Click Yes.
The server authentication mode will be updated.
TIP
If you are migrating the RSBizWare suite to two computers, perform the
following steps on the Target RSBizWare server computer.
By default, the computer on which you have installed FactoryTalk
Services Platform is automatically added to the FactoryTalk
Administration Console, which is a part of FactoryTalk Services
Platform.
The computer should be listed in the Explorer, under System >
Computers and Groups > Computers.
If it is not listed there, you should add it manually.
To add your local computer to the FactoryTalk Administration
Console:
1. In the FactoryTalk Administration Console, in the Explorer,
expand System > Computers and Groups.
2. Right-click Computers, and then click New Computer.
The New Computer dialog box appears.
3. In the Computer text box, type the name of the computer, or
click to search for it.
4. Click OK.
The computer is listed under Computers.
Step 16: Verify if the local
computer is added to the
FactoryTalk Administration
Console
156 Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014