Rockwell Automation RSBizWare Administration Guide - Manual (Page 223)

Controlling access to your RSBizWare system Chapter 8
A workcell is counted against the license when it is enabled in the
Configuration Console. After your server reaches its workcell limit,
you will not be able to enable any more workcells.
The server activations include new activations for the Manual Data
Editing (MDE) workcells. The licenses are required to:
• Create manual workcells without using any data points during
the configuration.
• Create manual events that have no link with data points.
NOTE
If there is no valid MDE activation, or the limit of available MDE
activations is exceeded, a warning message appears.
Server activations are cumulative. For example, you can install a 100
workcell activation as well as a 10 workcell activation and assign
both activations to the same Information Services Manager for a
total of 110 workcells.
NOTE
Any FactoryTalk Metrics server activation will also activate 25
FactoryTalk Historian Classic time-series reporting tags.
Server activations are based on the total number of reporting tags
that can be configured. These reporting tags can reference data
points from your control system collected natively with FactoryTalk
Historian Classic, as well as those referenced in other report data
sources, such as custom database tables. After your server reaches its
reporting tag limit, you will not be able to configure additional
reporting tags.
Server activations are cumulative up to the 70,000 reporting tag
limit. For example, you can install a 1500 reporting tag activation as
well as a 150 reporting tag activation and assign both activations to
the same Information Services Manager for a total of 1650 reporting
tags. However, you cannot install a 70,000 reporting tag activation
and a 5000 reporting tag activation and assign both activations to
Server activations for
FactoryTalk Historian Classic
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 223