Rockwell Automation RSBizWare Administration Guide - Manual (Page 184)

Chapter 4 Migrating RSBizWare
The following message appears:
5. Click Yes.
The following message appears:
6. Click OK.
7. Click Close.
8. In the Configuration Checklist dialog box, under Define
Connectors, click Step 2.
The Connector Definition dialog box appears.
9. In the Host Name text box, replace the name of the source
computer on which you backed up the FactoryTalk
Transaction Manager configuration with the name of the
target computer on which you restored the configuration.
10. In the User Name text box, replace the name of the user of the
source computer with the name of the user of the target
computer.
11. In the Password text box, replace the password of the user of
the source computer with the password of the user of the
target computer.
184 Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014