Rockwell Automation RSBizWare Administration Guide - Manual (Page 57)

Installing RSBizWare Chapter 3
A message box with the test results appears.
TIP
If the test does not complete successfully, make sure that you
have selected the correct authentication mode for your SQL
Server (page 57), and then run the test again.
TIP
If you have chosen the installation on two computers, perform the
following steps on the Database server computer.
The RSBizWare configuration requires the mixed mode as the
authentication method for the SQL server. Follow the steps below
to verify and/or correct the authentication method you have
selected for your SQL server.
To check and/or correct the authentication method for the SQL
server:
1. On the Start screen, click SQL Server Management Studio.
Repair the connection to SQL
Server
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 57