Rockwell Automation RSBizWare Administration Guide - Manual (Page 217)

Administering RSBizWare servers Chapter 7
The following Metrics Server Manager-specific settings can be
stored in the file:
Value name (units) Default
value
Description Location in pre-RSBizWare 9.0
software
LogLocation ServerCalls (On or
Off) On Turns the application-specific informational
and debug-level logging on or off for
function calls at the global server level.
The LogLocation registry value, with bit 1
set in the hexadecimal bitmask.
LogLocation
RSSqlThreadGeneral (On or Off) Off Turns the application-specific informational
and debug-level logging on or off for
general processing messages from the
FactoryTalk Transaction Manager process
thread.
The LogLocation registry value, with bit 2
set in the hexadecimal bitmask.
LogLocation RSSqlRSLFileDetail
(On or Off) On Turns the application-specific informational
and debug-level logging on or off for RSL
file content messages from the FactoryTalk
Transaction Manager process thread.
The LogLocation registry value, with bit 4
set in the hexadecimal bitmask.
LogLocation ScheduleThread (On
or Off)
Off Turns the application-specific informational
and debug-level logging on or off for
Schedule thread messages.
The LogLocation registry value, with bit 8
set in the hexadecimal bitmask.
LogLocation CalcThreadGeneral
(On or Off) On Turns the application-specific informational
and debug-level logging on or off for
general processing messages in the
Calculator thread.
The LogLocation registry value, with bit 10
set in the hexadecimal bitmask.
LogLocation CalcThreadSchedule
(On or Off) Off Turns the application-specific informational
and debug-level logging on or off for time
pattern schedule processing messages in the
Calculator thread.
The LogLocation registry value, with bit 20
set in the hexadecimal bitmask.
LogLocation CalcThreadData
Details (On or Off) On Turns the application-specific informational
and debug-level logging on or off for data
processing messages from the Calculator
thread.
The LogLocation registry value, with bit 40
set in the hexadecimal bitmask.
LogLocation
CalcThreadCalculation (On or
Off) On Turns the application-specific informational
and debug-level logging on or off for OEE
calculation messages in the Calculator
thread.
The LogLocation registry value, with bit 80
set in the hexadecimal bitmask.
LogLocation CalcThreadEvent
Detail (On or Off) On Turns the application-specific informational
and debug-level logging on or off for event
processing messages in the Calculator
thread.
The LogLocation registry value, with bit 100
set in the hexadecimal bitmask.
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 217