Rockwell Automation RSBizWare Administration Guide - Manual (Page 162)

Chapter 4 Migrating RSBizWare
9. Click OK.
The newly added Windows-linked user appears under the
Users folder in the Explorer.
TIP
If you are migrating the RSBizWare suite to two computers, perform the
following steps on the Target RSBizWare server computer.
To recreate the configuration, use the data from your source
computer. For details, see "Step 5: Keep your FactoryTalk
Administration Console configuration for reference (page 124)".
To recreate your users:
1. In the FactoryTalk Administration Console, in the Explorer,
expand System > Users and Groups.
2. Right-click Users, and then click New > User.
The New User dialog box appears.
3. In the User name box, type the same user name that you used
in your original FactoryTalk Administration Console
configuration.
4. Select the User cannot change password option.
5. Select the Password never expires option.
Step 19: Recreate your users
162 Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014