Rockwell Automation RSBizWare Administration Guide - Manual (Page 292)

Appendix D Application notes for FactoryTalk Transaction Manager
If it does not work, remove the old server manually:
1. In the Registry Editor, find HKLM\Software\Rockwell
Software\RSSql\Configuration Servers\.
2. Delete the folder with the old computer name.
3. Restart FactoryTalk Transaction Manager
In some instances, it may be necessary to manually start or stop
FactoryTalk Transaction Manager services from a DOS command
prompt. The following table summarizes the FactoryTalk
Transaction Manager service names and the associated name for that
service as it appears in the Services list (accessible from Control
Panel).
FactoryTalk Transaction Manager service name Displayed name
rssql_cfg_server FactoryTalk Transaction Manager Configuration Server
rssql_comp_storer FactoryTalk Transaction Manager Compression Server
rssql_ddecoll FactoryTalk Transaction Manager DDE Connector
rssql_lnxcoll FactoryTalk Transaction Manager RSLinx Classic Connector
rssql_mts_storer FactoryTalk Transaction Manager COM+ Connector
rssql_oci_storer FactoryTalk Transaction Manager OCI Enterprise Connector
rssql_oledb_storer FactoryTalk Transaction Manager OLE DB Enterprise Connector
rssql_opccoll FactoryTalk Transaction Manager OPC Connector
rssql_pm_storer FactoryTalk Transaction Manager FactoryTalk Metrics Enterprise
Connector
rssql_rnacoll FactoryTalk Transaction Manager FactoryTalk Connector
rssql_rsvcoll FactoryTalk Transaction Manager RSView Connector
rssql_storer FactoryTalk Transaction Manager ODBC Enterprise Connector
rssql_tb FactoryTalk Transaction Manager service
rssql_tmctrl FactoryTalk Transaction Manager Transaction and Control Manager
service
For example, if you want to start the FactoryTalk Transaction
Manager Configuration Server from a DOS command prompt, type
the following:
Starting and stopping
FactoryTalk Transaction
Manager services manually
292 Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014