Rockwell Automation RSBizWare Administration Guide - Manual (Page 72)

Chapter 3 Installing RSBizWare
Item Description
HTTP Port Type the port number on which the server will listen
for requests from Configuration Consoles.
The Configuration Console uses HTTP in addition to
raw TCP/IP to communicate to the Information
Services Manager.
The default HTTP port is 8080.
Note: Oracle 9.2.0.1.0 uses port 8080. If you are
using this version of Oracle, you must set the HTTP
port to a value other than 8080.
HTML Root Type the name of the folder in which the server will
store reports that have been saved in the
Configuration Console.
You will need to change the HTML Root directory
setting if you have installed the server to a
non-default location.
13. Click Apply.
The following message appears:
14. Click Yes.
The following message appears:
72 Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014