Rockwell Automation RSBizWare Administration Guide - Manual (Page 243)

Chapter 10
Configuring data collection
The basic configuration of the data collection was already discussed
in the following sections:
• "Step 20: Register FactoryTalk Transaction Manager (page
85)"
• "Step 21: Define FactoryTalk Transaction Manager
configurations (page 87)"
• "Step 22: Register FactoryTalk Transaction Manager
configurations (page 91)"
In this chapter you will learn about:
• "Types of control connectors for the data collection (page
243)"
• "Types of enterprise connectors for the data collection (page
244)"
• "Unregistering FactoryTalk Transaction Manager
configurations (page 245)"
• "Starting and stopping FactoryTalk Transaction Manager
configurations (page 248)"
• "Troubleshooting (page 249)"
The FactoryTalk Transaction Manager interfaces with the industrial
control system device via a control connector. A control connector is
a Windows service that collects data from a data server, such as a
PLC and sends it to the FactoryTalk Transaction Manager.
Types of control connectors
for the data collection
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 243