Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) - Manual (Page 118)

118 Rockwell Automation Publication 7760-UM001D-EN-P - October 2014
Chapter 9 Maintenance
Control Components – Electronic
The printed circuit boards are to be kept clean and free of any accumulations of
dirt and foreign materials.
Materials which create static electricity should never be allowed near circuit
boards while in the unit, or in storage. Caution should be used when one is near
or handling circuit boards. There are no other requirements, other than
housekeeping standards, that the maintenance program requires on the logic
control components.
Fans
Physically rotating and observing the fans for noise or binding will indicate if fan
failure is evident.
Interlocks
Verify that interlocks function as intended, and have not been forced, damaged or
removed.
Barriers
Verify that all barriers are in place and securely fastened.
Environmental
Considerations Hazardous materials
Environmental protection is a top priority for Rockwell Automation. The facility
that manufactured this medium voltage product operates an environmental
management system that is certified to the requirements of ISO 14001. As part of
this system, this product was reviewed in detail throughout the development
process to ensure that environmentally inert materials were used wherever
feasible. A final review has found this product to be substantially free of
hazardous material.
Please be assured that Rockwell Automation is actively seeking alternatives to
potentially hazardous materials for which no feasible alternatives exist today in
the industry. In the interim, the following precautionary information is provided
for your protection and for the protection of the environment. Please contact the
factory for any environmental information on any material in the product or with
any general questions regarding environmental impact.