Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) - Manual (Page 15)

Rockwell Automation Publication 7760-UM001D-EN-P - October 2014 15
Product Overview Chapter 1
7761 – Combination Controller
A medium voltage solid-state controller designed to work in conjunction with
OEM/customer-supplied start and bypass controllers. It includes:
• Removable PowerBrick SCR assemblies
• Voltage sensing board
• Fiber optic connection from SMC Flex control module to gate driver
boards on PowerBricks
• A low voltage control panel complete with microprocessor-based control
module and control terminations
• A continuous bare copper ground bus (8 x 50 mm)
• Provision for bottom fed line and load connections
Figure 2 - Typical OneGear Single Line Diagram™ Bulletin 7761 (10...14.4 kV)
R, S, T U, V, W
SMC Flex
Control
Module
Output
Customer Supplied