Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) - Manual (Page 21)

Rockwell Automation Publication 7760-UM001D-EN-P - October 2014 21
Product Overview Chapter 1
SMC Flex Control Module
The MV SMC Flex controller offers a full range of starting and stopping modes
as standard:
• Soft Start with Selectable Kickstart
• Soft Stop
• Current Limit Start with Selectable Kickstart
• Linear Acceleration with Selectable Kickstart
(1)
• Linear Deceleration
(1)
• Dual Ramp Start
• Preset Slow Speed
(2)
• Full Voltage Start
Other features that offer further user benefit include:
• Extensive protection features
• Metering
• Communication capability
• I/O
Innovative control option provides enhanced performance:
• Pump Control (Start and Stop Control modes)
These modes, features and options are further described in this chapter.
(1) Requires motor tachometer.
(2) This option utilizes gating patterns which result in motor and line currents that produce noise and vibration in the motor and/or
distribution transformer. This must be considered before applying this option.