Communication, Programming, Communication programming – Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) User Manual
Page 37
Advertising
Rockwell Automation Publication 7760-UM001D-EN-P - October 2014
37
Product Overview
Chapter 1
Communication
A serial interface port (DPI) is provided as standard, which allows connection to
the Bulletin 20-HIM LCD human interface modules.
Figure 19 - DPI Location
Programming
Setup is easy with the built-in keypad and three-line, sixteen-character backlit
LCD. Parameters are organized in a three-level menu structure, using a text
format for straightforward programming.
Figure 20 - Built-in Keypad and LCD
ATTENTION: Two peripheral devices can be connected to the DPI. The
maximum output current through the DPI is 280 mA.
Port 5 – DPI Communications
Port 2
Ports 2 and 3 when two HIMs
are connected with a splitter
Advertising
This manual is related to the following products: