Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) - Manual (Page 13)

Rockwell Automation Publication 7760-UM001D-EN-P - October 2014 13
Chapter
1
Product Overview
Manual Objectives This manual is intended for use by personnel familiar with Medium Voltage and
solid-state power equipment. The manual contains material which will allow the
user to operate, maintain and troubleshoot the OneGear™ MV SMC™ Flex family
of controllers. The family consists of the following Bulletin numbers: 7760,
7761, 7762 and 7763.
Note: This user manual pertains to units with firmware release 6.003 or later.
Documentation The following Rockwell Automation publications provide pertinent information
for the MV SMC Flex and components:
Table 1 - Rockwell Automation MV SMC Flex publications
Description The MV SMC Flex is a solid-state, three-phase, AC line controller. It is designed
to provide microprocessor-controlled starting and stopping of standard three-
phase, squirrel-cage induction motors, using the same control module as the
Allen-Bradley Bulletin 1500 SMC Flex.
7703 – OEM Controller
A medium voltage solid-state controller designed to mount in a structure
provided by an OEM, and designed to work in conjunction with existing or
OEM/customer supplied start and bypass controllers. It is comprised of several
modular components, including:
• PowerBrick™ SCR assemblies including gate driver boards
• Loose interface and voltage feedback boards
• Fiber optic cables for SCR firing
• Microprocessor based control module
• Fiber Optic Interface Board
MV-QS050B-EN-P General Handling Procedures for MV Controllers
7760-TD001_-EN-P OneGear SMC Flex Solid-State Motor Controller (10...15 kV)™ Technical Data
7760-SR001_-EN-P OneGear SMC Flex Solid-State Motor Controller (10...15 kV)™ Specification Guide
1560E-WP023_-EN-P How to Successfully Apply Medium Voltage Soft Starters
150-WP003_-EN-P SMC Flex Controller with Pump Control