Rockwell Automation 7763 Medium Voltage OneGear SMC Flex Motor Controller (10-15 kV) - Manual (Page 93)

Rockwell Automation Publication 7760-UM001D-EN-P - October 2014 93
Communications Chapter 7
Table 33 - Logic Status Word (Control)
Reference/Feedback The SMC Flex does not offer the analog Reference feature. The analog Feedback
feature is supported and will provide Parameter1, Current in Phase A,
automatically as the feedback word.
Parameter Information A complete listing of the SMC Flex parameters is located in Appendix B.
Bit #
Status Description
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
X Stop
1 – Stop/Inhibit
0 – No/Action
X Start
1 – Start
0 – No Action
X
Option #1
Input
1 – Stop Maneuver/Inhibit (Option
Stop)
0 – No Action
X Clear Faults
1 – Clear Faults
0 – No Action
X
Option #2
Input 1 – Perform Option 2 function
0 – No Action
— — Bits 5…10 – Not Used
X Aux Enable
1 – Use Aux 1 to Aux 4
0 – Ignore Aux 1 to Aux 4
X Aux 1
1 – Aux 1 Active
0 – Aux 1 Inactive
X Aux 2
1 – Aux 2 Active
0 – Aux 2 Inactive
X X Aux 3
1 – Aux 3 Active
0 – Aux 3 Inactive
X X Aux 4
1 – Aux 4 Active
0 – Aux 4 Inactive