Chapter 35, 1797-acnr15 controlnet ex redundant media adapter, Module installation – Rockwell Automation 1797-XXX FLEX Ex System Certification Reference Manual User Manual
Page 167: Inputs/outputs, General specifications, Chapter
1
Publication 1797-6.5.6 - June 2005
Chapter
35
1797-ACNR15 ControlNet Ex Redundant Media
Adapter
Module Installation
Use the redundant media adapter module to connect FLEX Ex modules to the
ControlNet Ex network.
Inputs/Outputs
Do not apply any non-intrinsically safe signals to the adapter.
General Specifications
For a full list of specifications, refer to ControlNet Ex Redundant Media
Adapter Installation Instructions, publication 1797-5.14.
For Class II Division 1 Groups E, F, G and Class III, modules must be
installed in a UL listed Type 4, 4X, 6, 6P, 9, 12, or 12K enclosure.
PWR
1797-ACNR15
3
2
41408
Operational Temperature
-20 to 70
o
C (-4 to 158
o
F)
Agency Certification
Class I Division 1 Groups A-D T4
Class I Zone 1 AEx ib IIC T4
Class II Division 1 Groups E, F, G; Class III
Certificates
UL Certificate Number 99.19699
C
US