Rockwell Automation 1797-XXX FLEX Ex System Certification Reference Manual - Manual (Page 208)

Publication 1797-6.5.6 - June 2005
45-4 1797-IE8H FLEX Ex 8 Input HART Analog Module
are less than or equal to V
max
and I
max
of the intrinsically safe apparatus and the
approved values of C
a
and L
a
of the associated apparatus are greater than C
i
+
C
cable
and L
i
+ L
cable
respectively for the intrinsically safe apparatus.
Simple apparatus is defined as a device which neither generates nor stores
more than 1.2V, 0.1A, 20µJ, or 25mW.
Wiring methods must be in accordance with the National Electric Code,
ANSI/NFPA 70, Article 504 and 505. For additional information refer to
ANSI/ISA RP12.6.
This module, 1797-IE8H, must be used with terminal base 1797-TB3 or
1797-TB3S.
Terminals 3, 7, 11, 15, 20, 24, 28, 32, 36-39, and 46-49 shall not be
connected.
WARNING: Substitution of components may impair intrinsic safety.