For 3.5 inch hard disk drives – Rockwell Automation 6180 Industrial Computers User Manual
Page 104
Advertising
8–2
Adding and Removing Data Storage Drives
Publication 6180-6.0
2. Remove the back panel of the 6180 Computer. See page 4-2.
Figure 8- 1
3. Disconnect the ribbon cable connector from the drive. On 3.5 inch
drives, also disconnect the power connector from the drive.
4. Remove the two screws securing the drive / bracket assembly.
5. Remove the drive / bracket assembly.
For 3.5 Inch Hard Disk Drives
1. Remove the four drive mounting screws and the drive.
Advertising