Rockwell Automation 6180 Industrial Computers - Manual (Page 39)

Installation 2–3
Publication 6180-6.0
Allow adequate space for mounting, air flow, and maintenance. The
figure below shows recommended minimum clearances to other
components within the rack or enclosure.
ATTENTION: The 6180 Computer should not be
operated within a confined space of the dimensions
shown below unless adequate ventilation or other cooling
methods are used to lower the air temperature within the
enclosure.
Figure 2- 1
ATTENTION: Before installing the 6180 Computer in a
panel, check the clearances of any add–in boards. If your
system has an Ethernet card installed, the card must be
checked for clearance before installation. Failure to
follow this caution may result in damage to the 6180
Computer and/or panel.
Mounting Clearances