Rockwell Automation 6180 Industrial Computers - Manual (Page 156)

13–34 Keypad Configuration Utility Software
Publication 6180-6.0
Enabling Single Key Hold-Off Interval
If you want to prevent “key teasing” for an end-user specified interval:
1. Run the Keypad Configuration Utility from the Start>Programs
menu.
2. From the Edit menu, select Keypad Preferences.
The Keypad Preferences dialog is displayed.
3. Select the desired time value from the drop-down menu for either the
programmable or the fixed key groups (or both). In the example
shown below, a value of 1 sec is selected for the programmable key
group and 500 ms is selected for the fixed key group.
Figure 13- 27