Rockwell Automation 6180 Industrial Computers - Manual (Page 98)

7–8 Adding and Removing Removable Media
Publication 6180-6.0
8. Apply power to the 6180 Computer and verify operation of the drive.
You may need to edit BIOS settings to recognize the drive or to
allow the operating system to detect the new hardware.
Floppy Drive Upper Bay Mounting Bracket
The upper bay mounting bracket allows you to mount a floppy drive out
the side of the 6180 Computer chassis.
Mounting Bracket for Upper Bay Floppy Drive
(Catalog No. 6189–UBFDBRKT for Series A; Catalog No. 6189-
UBFDBRKTB for Series B)
Figure 7- 7
Installation
To install a floppy using the upper bay mounting bracket:
1. Secure the floppy drive to the drive bracket using four screws
supplied with the drive. Tighten screws to a torque of 6–8 in. lbs
(.7–.9 N•m).