Rockwell Automation 6180 Industrial Computers - Manual (Page 93)

Adding and Removing Removable Media 7–3
Publication 6180-6.0
To remove the floppy drive or CD-ROM drive:
1. Disconnect power from the 6180 Computer.
ATTENTION: Disconnect all power before adding and
removing components. Failure to disconnect power could
result in severe electrical shock or damage to the 6180
Computer.
2. Remove the back panel. See page 4-2.
Figure 7- 2
ATTENTION: If the 6180 Computer is installed with
mounting clips, the mounting clips on the hinge side will
interfere with the opening of the hinge. Remove the
mounting clips on the hinge side before swinging chassis
away from the bezel. Failure to remove clips may
damage clips and the chassis.