Rockwell Automation 6180 Industrial Computers - Manual (Page 124)

13–2 Keypad Configuration Utility Software
Publication 6180-6.0
•
transfer the old KIC card to the new computer.
•
modify the key codes in the KIC utility on the new computer to match
the existing application. Save the key code definitions to a Keypad
Configuration file (*.key) for later retrieval.
The Keypad Configuration Utility is a 32 bit Microsoft Windows
application that runs on the 6180 computer in these environments:
•
Windows 95/98/2000
•
Windows NT, version 4.0 or later
Several new keypad features were introduced in version A5.02
Alphanumeric KIC card firmware. Control of these new features is
handled through a new release of the KCU, version 3.20.02 (or later).
These new features affect either or both the programmable and fixed key
groups of keys, depending on the particular feature. Refer to Figure 1
for information on key partitioning.
Alphanumeric Keypad Layout
Figure 13- 1
System Requirements
Keypad Configuration
Utility – New Features