Rockwell Automation 6180 Industrial Computers - Manual (Page 57)

Installation 2–21
Publication 6180-6.0
A standard IEC 320 power cord provides power to the 6180 Computer.
The power supply input will accept 120/240V AC.
ATTENTION: If the power supply has a manual input
voltage selection switch, check voltage selection before
applying power.
ATTENTION: The power cord must be connected to an
outlet having an earth ground (three prong outlet).
Failure to follow this warning could result in severe
electrical shock.
Use the cord retainer to prevent accidental interruption of power to the
6180 Computer. Pull the cord retainer over the cord plug as shown
below.
The following illustration pertains to 6180 Computers equipped with a
Pentium Class CPU.
Figure 2- 13
1 The power cord connector is recessed on 6180 Computers equipped with a
Pentium III CPU.
Power Connections (6180
AC unit)