Rockwell Automation 6180 Industrial Computers - Manual (Page 179)

European Union Directive European Union Directive European Union Directive European Union Directive
Compliance
Compliance Compliance Compliance
If the 6180 Industrial Computer is installed within the European Union
or EEA regions and has the CE mark, the following regulations apply.
EMC Directive
This apparatus is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using the following standards, in
whole or in part:
•
EN 50081–2:1993 EMC - Generic Emission Standard,
Part 2 - Industrial Environment
•
EN 50082–2:1995 EMC - Generic Immunity Standard,
Part 2 - Industrial Environment
The product described is intended for use in an industrial environment.
LV Directive
This apparatus is designed and tested to meet Council Directive
73/23/EEC Low Voltage Directive (LVD) using the following standards,
in whole or in part:
•
EN 60950 with all national deviations
•
UL 508
•
UL 1950
Intended Use of Product
According to these Standards, the factor which determines, for EMC
purposes, whether an apparatus is deemed to be “Industrial” or
“Residential, commercial and light industrial”, is given in Clause 1 of
EN50081–2 as follows:
Apparatus covered by this standard is not intended for connection to a
public mains network but is intended to be connected to a power network
supplied from a high– or medium–voltage transformer dedicated for the
supply of an installation feeding a manufacturing or similar plant.
Appendix Appendix Appendix Appendix
B
European Union Directive
Compliance