Rockwell Automation 6180 Industrial Computers - Manual (Page 155)

Keypad Configuration Utility Software 13–33
Publication 6180-6.0
The Keypad Preferences dialog is displayed.
8. Select the Single Programmable Key Mode with Abort button.
9. From the File menu, select Store Keypad Configuration to KIC.
Multi-key presses of programmable keys are now inhibited and will
generate a global key abort if they are attempted.
Note:
Standard Multi-Key Mode, Single Programmable Key Mode
and Single Programmable Key Mode with Abort are
mutually exclusive modes; only one mode may be selected
at a time.
Enabling Make/Break Non-Repeat Mode
If you want to prevent key autorepeating:
1. Run the Keypad Configuration Utility from the Start>Programs
menu.
2. From the Edit menu, select Keypad Preferences.
The Keypad Preferences dialog is displayed.
3. Select the Make/Break Non-Repeat Mode box of the key group to
which you wish to apply this feature.
Both the programmable and fixed key groups can be selected
simultaneously, if desired.
4. From the File menu, select Store Keypad Configuration to KIC.
When a programmable key is now pressed, only a single Make code will
be generated when the key is initially pressed, and the Break code will be
generated when the key is released.