Rockwell Automation 6180 Industrial Computers - Manual (Page 94)

7–4 Adding and Removing Removable Media
Publication 6180-6.0
3. From the bottom of the chassis (under the accessory drive), remove
the 4 screws that secure the accessory drive/ bracket assembly.
Figure 7- 3
4. The sequence of the following steps depends on whether the floppy
drive or CD-ROM drive is mounted to the rear or front:
•
If mounted for front access, do step 6 then step 7.
•
If mounted for rear access, do step 7 then step 6.
5. Disconnect the ribbon cable connector and power cable connector
from the accessory drive.
Figure 7- 4